Common Sources of Pool Stains

Decaying organic debris such as leaves, berries and acorns can leave behind stains on the pool surface if not removed promptly.  In some regions, stains left by oak leaves are especially problematic.  Organic debris typically leaves brown stains caused by naturally occurring tannins. Algae can tint the pool water (usually green) and also speckle the surface.  The three most common algae types are described by their respective colors – green, black or yellow (also called mustard).

Metals, such as iron and copper, are found naturally in water and their presence can be compounded by leaching from other sources such as residential plumbing, fertilizers, and pesticides.  Copper also comes from pool heaters which often have copper heat exchangers, and from pool algaecides. The issue with metals is that water evaporates but metal does not, so the concentration of metals builds over time.  When the saturation point is reached, the pool water is not able to contain additional metal.  This is when metals begin to cleave to the pool surface and form stains.  Sequestering agents can help to keep metals in suspension to prevent staining but are not sufficient in some cases.

How to ID Stains

Stain identification can be tricky.  No doubt, you can find a lot of pictures online and try to compare your pool stain to others, but different compounds can cause similar looking stains.  So it is best not to guess.  Just to give you a primer, we’ll run down a list of different stains’ characteristics here and then go on to actual testing for stains.

Organics – will leave an impression in the shape of the offending debris, typically brown in colour.

Testing for Stains

In most cases, the best way to correctly identify a pool stain is to use a stain id kit.  For iron, you can try a simple test first with vitamin C.  Hold a vitamin C tablet against the stained area for about 30 seconds and see if the stain gets lighter or disappears.  If it does, you have iron stains and can use ascorbic acid to treat.  If it doesn’t, you have at least ruled out iron. Similarly, if you suspect a stain from leaves or other decomposed organic debris, you can hold a trichlor tablet on the stain to see if it lightens.  Chlorine will lighten organic stains but will not affect metal stains.  Shocking the pool to raise free chlorine is the way to get rid of those brown tannin stains.

For other stains, we suggest the Jack’s Magic Stain ID kit to be sure you treat for the correct problem.  Trying to guess and potentially treating for the wrong cause will cost you time and money and could create more problems.  The Jack’s Magic kit allows you to easily perform a series of topical tests by holding different stain solutions over the stain area.  Each test takes about one minute to complete.  Most of your time will be in preparation since your pool water first needs to be balanced to meet the proper levels for stain testing and treatment.

Once you see which stain solution worked best, you can follow up with the specific recommended treatment.  Remember, it might take repeated treatments in some cases but there is hope for restoring your pool.

Visit at: https://bit.ly/2Iy37h0